NI Digital Waveform Generator/Analyzer Getting Started Guide
|
© National Instruments
|
5
Documentation
The NI digital waveform generator/analyzer kit may also include the following documents:
•
NI digital waveform generator/analyzer specifications—This printed document provides
specifications for your device.
•
Read Me First: Safety and Electromagnetic Compatability
•
Maintain Forced-Air Cooling Note to Users
•
Retrofitting Your PXI Module Note to Users
(NI PXI-6551/6552 only)
•
Using Ferrites to Reduce High-Frequency Emissions Note to Users
(applicable devices
only)
Ferrites (NI PXIe-6544/6545/6547/6548 Only)
The NI PXIe-6544/6545/6547/6548 kit also includes two ferrites and documentation that
describes under what conditions you should install the ferrites. Refer to the
Using Ferrites to
Reduce High-Frequency Emissions Note to Users
for more information about using the ferrites.
EMI Gasket (NI PXI-6551/6552 Only)
The NI PXI-6551/6552 kit also includes an EMI gasket and documentation that describes under
what conditions you should install the gasket. Refer to step
5. Installing the Hardware
for more
information about the gasket.
4. Installing the Software
This section describes the software installation process for the NI digital waveform
generator/analyzer.
Choose and Install Your ADE
You can create applications for your digital waveform generator/analyzer using LabVIEW,
LabWindows
™
/CVI
™
, or Microsoft Visual C++.
LabVIEW features interactive graphics, a state-of-the-art interface, and a powerful graphical
programming language. LabWindows/CVI is a complete ANSI C ADE that features an
interactive user interface, code generation tools, and the LabWindows/CVI Data Acquisition
libraries. Using LabVIEW or LabWindows/CVI can greatly reduce your application
development time.
If you have not already installed the ADE, follow the instructions in the product documentation
to install your ADE now.