The following NI Ethernet cables are available for the cRIO-9035.
Table 3. RJ-45 Gigabit Ethernet Cables
Cables
Length
Part Number
CAT-5E Ethernet Cable, shielded
2 m
151733-02
5 m
151733-05
10 m
151733-10
Related Information
Power Connector
The cRIO-9035 has a power connector to which you can connect a primary and secondary
power supply. The following table shows the pinout for the power connector.
Table 4. Power Connector Pinout
Pinout
Pin
Description
V1
C
V2
C
V1
Primary power input
C
Common
V2
Secondary power input
C
Common
Caution
The C terminals are internally connected to each other, but are not
connected to chassis ground. This isolation is intended to prevent ground loops and
does not meet UL ratings for safety isolation. You can connect the C terminals to
chassis ground externally. Refer to the specifications on
for
information about the power supply input range and maximum voltage from
terminal to chassis ground.
If you apply power to both the V1 and V2 inputs, the cRIO-9035 operates from the V1 input.
If the input voltage to V1 is insufficient, the cRIO-9035 operates from the V2 input.
The cRIO-9035 has reverse-voltage protection.
The following NI power supplies and accessories are available for the cRIO-9035.
Table 5. Power Accessories
Accessory
Part Number
NI PS-15 Power Supply, 24 VDC, 5 A, 100-120/200-240 VAC Input
781093-01
NI PS-10 Desktop Power Supply, 24 VDC, 5 A, 100-120/200-240 VAC Input 782698-01
8
|
ni.com
|
NI cRIO-9035 User Manual