National Instruments NI cRIO-9035, User Manual

Page: 9 / 40

Table 5. Power Accessories (Continued)
Accessory Part Number
4-Position Gold Power Supply Plugs (Quantity 5) 783529-01
NI 9979 Strain Relief for 4-Position Power Connector 196939-01
Related Information
POWER LED Indicators on page 17
SD Card Removable Storage
The cRIO-9035 provides an SD card slot that can read from and write to NI-approved SD
cards.
Caution You must use the SD card slot cover to protect the SD card in hazardous
locations.
Caution Do not insert or remove SD cards unless power has been switched off or
the area is known to be nonhazardous.
Note Using SD cards that are not approved by NI might invalidate specifications
and result in unreliable performance.
The following accessories are available for the SD card slot.
Table 6. cRIO-9035 SD Storage Accessories
SD Card Capacity Part Number
SD Industrial Storage Card 16 GB 783658-01
32 GB 783659-01
SD Door (x3) — 783660-01
Related Information
File System on page 21
SD Card Slot Cover
You must use the SD card slot cover to protect the SD card in hazardous locations. Do not
remove an SD card while either LED is flashing or lit because file corruption may result.
Note
Screw the slot cover closed completely. Tighten the captive screws to a
maximum torque of 0.75 N · m (6.7 lb · in.) using a #1 Phillips screwdriver. Do not
overtighten.
RS-232 Serial Port
The cRIO-9035 has an RS-232 serial port that is implemented with an RJ-50, 10-position
modular jack to which you can connect devices such as displays or input devices. Use the
NI cRIO-9035 User Manual | © National Instruments | 9