1-32
|
ni.com
Chapter 1
Getting Started with the cDAQ Chassis
LEDs
The cDAQ chassis features four LEDs—POWER, DRIVE, STATUS, and USER1—on its front
panel, two LEDs—ACT/LINK and 10/100/1000—near each Ethernet connector, and one LINK
LED near the MXI-Express port. Refer to Figure 1-1 for the locations of the LEDs. Table 1-8
lists the LEDs and status indications.
Table 1-8.
LED Indications
LED
LED
Color
LED State
Indication
LINK
Green
Solid
MXI-Express communication established
Yellow
Solid
MXI-Express communication broken or no cable is
connected
POWER
Green
Solid
The cDAQ chassis is powered from the V1 input
Yellow
Solid
The cDAQ chassis is powered from the V2 input
—
Off
The controller is not powered.
DRIVE
Yellow
Solid
An internal drive is being accessed.
