NI 9919 Installation Guide and Specifications
|
© National Instruments
|
11
Mounting a Power Supply in the NI 9919
The NI 9919 supports the panel mount method for an NI PS-14/15 power supply. Use the
mounting holes shown in Figure 10 and the four power supply mounting screws to panel mount
your power supply.
Figure 10.
NI 9919 Power Supply Mounting Holes
Note
NI does not recommend tapping the mounting plate.
Mounting Equipment on the Bottom Panel
The NI 9919 supports mounting of equipment and DIN rails using the mounting holes on
the bottom panel. Visit
for dimensions for the mounting holes on the
bottom panel.
1
Power Supply Mounting Holes
1
