NI 9919 Installation Guide and Specifications
|
© National Instruments
|
15
Connecting Custom Cables to the NI 9919
The NI 9919 has nine, eight-position barrier strip connectors on the rear panel for I/O
connections.
When connecting cables to the barrier strips, use ring or spade lugs to connect to the #8 stud
for outside connections and 0.25 in. wide female quick connects for the inside connections.
Terminate the cable shields to the chassis ground terminal adjacent to the barrier strip connector.
The NI 9919 includes 12 chassis ground terminals, as shown in Figure 14.
Figure 14.
NI 9919 Chassis Grounding Screws
1
Chassis ground terminals
1
