![background image](http://html2.mh-extra.com/html/national-instruments/ni-9246/ni-9246_calibration-procedure_3548939001.webp)
CALIBRATION PROCEDURE
NI 9246/9247
This document contains the verification and adjustment procedures for the NI 9246 and NI 9247.
For more information about calibration solutions, visit
.
Contents
Software.................................................................................................................................... 1
Documentation.......................................................................................................................... 2
Test Equipment......................................................................................................................... 3
Test Conditions......................................................................................................................... 3
Initial Setup............................................................................................................................... 3
Verification............................................................................................................................... 4
EEPROM Update ..................................................................................................................... 6
Reverification ........................................................................................................................... 7
Worldwide Support and Services ............................................................................................. 7
Software
Calibrating the NI 9247 requires the installation of NI-DAQmx 15.1 or later on the calibration
system. You can download NI-DAQmx from
. NI-DAQmx supports
LabVIEW, LabWindows
™
/CVI
™
, C/C++, C#, and Visual Basic .NET. When you install
NI-DAQmx you only need to install support for the application software that you intend to use.