2
3
4
1
1. Loosen the captive screws on the TB-9212 with screw terminal and remove
the top cover and foam pad.
2. Insert the stripped end of the wire fully into the appropriate terminal and
tighten the screw for the terminal. Make sure no exposed wire extends past
the screw terminal.
3. Route the wire through the TB-9212 with screw terminal opening, remove
slack from the wiring, and secure the wires using a zip tie.
4. Replace the foam pad in the TB-9212 with screw terminal opening, reinstall
the top cover, and tighten the captive screws.
Installing the TB-9212 with Mini TC
What to Use
■
NI 9212
■
TB-9212 with mini TC
■
Screwdriver
What to Do
© National Instruments
13
NI-9212
Summary of Contents for NI 9212
Page 1: ...NI 9212 2023 06 07...
