National Instruments NI 9212, Manual

Page: 15 / 16

2. Install a clamp-on ferrite bead on the shield ground wire between the cable
and the ground lug. You can use one ferrite bead per device for all cables.
Where to Go Next
CompactRIO NI CompactDAQ
Located at ni.com/manuals
RELATED INFORMATION
C Series Documentation
& Resources
ni.com/info cseriesdoc Services
ni.com/services
Installs with the software
NI 9212 Datasheet
NI-RIO Help
LabVIEW FPGA Help
NI 9212 Datasheet
NI-DAQmx Help
LabVIEW Help
Worldwide Support and Services
The NI website is your complete resource for technical support. At ni.com/support ,
you have access to everything from troubleshooting and application development
self-help resources to email and phone assistance from NI Application Engineers.
Visit
ni.com/services for NI Factory Installation Services, repairs, extended warranty,
and other services.
Visit
ni.com/register to register your NI product. Product registration facilitates
technical support and ensures that you receive important information updates from
NI.
A Declaration of Conformity (DoC) is our claim of compliance with the Council of the
European Communities using the manufacturer’s declaration of conformity. This
system affords the user protection for electromagnetic compatibility (EMC) and
product safety. You can obtain the DoC for your product by visiting ni.com/
certification . If your product supports calibration, you can obtain the calibration
certificate for your product at ni.com/calibration .
© National Instruments
15
NI-9212