Getting Started with the NI 17xx
16
ni.com
6. If you want to prevent other users from resetting the smart
camera, click the
Lock
button on the MAX toolbar to set up
password protection for the smart camera. To require users to
enter the password before restarting the smart camera, enable
the
Password-protect Resets
checkbox.
7. Click
Apply
on the MAX toolbar.
8. When prompted, click
Yes
to restart the smart camera.
The initialization process may take several minutes.
Install Software on the NI Smart Camera
Complete the following steps to install software from the
development computer to the NI Smart Camera.
1. In the Remote Systems branch of the MAX configuration tree,
expand the folder for your device and select
Software
.
2. Click
Add/Remove Software
on the MAX toolbar to launch
the LabVIEW Real-Time Software Wizard.
3. Select
LabVIEW Real-Time
,
NI Vision RT
,
NI-IMAQ RT
,
NI-IMAQ Server
, and any additional software necessary for
your application, as shown in Figure 6.
Figure 5.
Selecting Software to Install in MAX
4. Click
Next
.
5. Verify your software installation choices, and click
Next
.
6. When the installation is complete, click
Finish
.
