NI PXIe-6672 Installation Guide
2
ni.com
Figure 1.
System Timing Device Slot Indicator Glyph without Circle
Figure 2.
System Timing Device Slot Indicator Glyph on the NI PXIe-1062Q Chassis
Notes
The slot number printed on the glyph may vary from chassis to chassis.
The circle inside of the square indicates that the slot may also be used as a PXI Express
peripheral slot.
3.
Remove the filler panel for the PXI slot you located in step 2.
4.
Ground yourself using a grounding strap or by holding a grounded
object. Follow the ESD protection precautions described in the
Unpacking
section of Chapter 1,
Introduction
, of the
NI PXIe-6672
User Manual
.
5.
Remove any packing material from the front panel screws and
backplane connectors.
6.
Insert the NI PXIe-6672 into the PXI Express slot. Use the
injector/ejector handle to fully insert the module into the chassis.
7.
Screw the front panel of the device to the front panel mounting rail of
the chassis.
8.
Visually verify the installation. Make sure the module is not touching
other modules or components and is fully inserted into the slot.
9.
Plug in and power on the chassis.
The NI PXIe-6672 is now installed.
