background image

©

 National Instruments Corporation

xiii

VXI/VME-PCI8026 for Linux

About This Manual

This manual contains instructions for installing and configuring the 
National Instruments VXI-PCI8026 or VME-PCI8026 Series interface kit 
for Linux. The VXI-PCI8026 kit includes a VXI-MXI-2 module that plugs 
into a VXI mainframe and links your PCI-based computer to the VXIbus. 
The VME-PCI8026 kit includes a VME-MXI-2 that plugs into a VME 
chassis and links your PCI-based computer to the VMEbus. Both kits 
include the PCI-MXI-2 interface board, which links your computer to the 
MXIbus, and the NI-VXI bus interface software. The VXI-PCI8026 and 
VME-PCI8026 kits are fully VXIplug&play compliant.

This manual uses the term VXI/VME-PCI8026 when information applies to 
either kit and the term VXI/VME-MXI-2 when information applies to either 
the VXI-MXI-2 or the VME-MXI-2.

How To Use the Manual Set

Getting Started

Manual

Installation and

Configuration

 Online 

NI-VISA

User Manual

NI-VISA

Reference

NI-VXI and NI-VISA

Function Help,

victext

Use Online

Utilities:

  Online 

NI-VXI

User Manual

NI-VXI

Reference

Summary of Contents for MXI VXI-PCI8026





































































































































Reviews: