![background image](http://html.mh-extra.com/html/national-instruments/mon-10496/mon-10496_user-manual_709655010.webp)
Figure 2. Antenna and Boot Parts
1
2
3
1. Antenna
2. Large boot
3. Small boot
Complete the following steps to install the antenna.
1.
Slide the large boot over the base of the antenna.
2.
Place the small boot over the RP-SMA connector.
3.
Attach the antenna to the device and tighten to a torque of 0.45 N · m (4 lb · in.).
4.
Slide the large boot down the antenna to the base.
5.
Press the large boot into place to create a snug seal.
Connecting
Wiring Guidelines
Adhere to the following guidelines when wiring the MON-10496.
Caution
Before opening the MON-10496 for service, you must turn off the
external power to the device and use the external breaker box to completely remove
mains power.
10
|
ni.com
|
MON-10496 User Guide