SCC Quick Start Guide
12
ni.com
Figure 9.
SC-2350 Carrier Installation Diagram
Connecting Digital Signals (Optional)
The SC-2345/2350 has a 42-position, triple-row screw-terminal block for
connecting to DAQ device digital signals. Depending on the DAQ device
you are using, you can connect the terminal block to various digital signals.
Refer to Figure 10 for signals of E Series or M Series Connector 0. The
SC-2345 Quick Reference label identifies the location of each signal on the
terminal rows A to C. The terminal label numbers correspond to the pin
number location of each signal on the 68-pin DAQ device connector. Refer
to the DAQ device documentation for more information about this
connector.
1
Cover Screws
2
Screw Terminal Block
3
TEDS Screw Terminal
4
SCC Module—Analog Output
5
SCC-PWR
XX
6
D-Sub Panelette
7
SCC Modules—Analog Input
8
Connector Block Sockets
9
TEDS Screw Terminal: RETURN Screw Terminal
10 TEDS Screw Terminal: DATA+ Screw Terminal
11 Strain-Relief Panelette
2
3
4
5
6
7
8
9
10
11
1
