©
National Instruments Corporation
11
SCC Quick Start Guide
6.
Close or replace the top cover.
7.
Reinsert and tighten the cover screws to ensure proper shielding.
For complete signal-connection information, refer to the SCC-
XX
module
user guide. For more information about using the SC-2345, refer to the
SC-2345/2350 User Manual
.
SC-2350: Connecting TEDS Sensors
If you are using an IEEE P1451.4 TEDS-compatible smart sensor,
complete the following steps to connect the TEDS DATA and RETURN
signals. Refer to Figure 8 when completing the following steps.
1.
Connect the DATA signal to the
DATA+
screw terminal on the TEDS
screw terminal.
2.
Connect the RETURN signal to the
RETURN
screw terminal on the
TEDS screw terminal.
Figure 8.
TEDS DATA+ and RETURN Connections
Figure 9 shows the SC-2350 carrier with the SCC modules installed.
1
DATA+ 2
2
DATA+ 10
3
RETURN 10
4
RETURN 2
DATA+ 2/10
RETURN 2/10
J27
1
4
2
3
0
1
