background image

Chapter 2

Connecting Signals

NI PXI-4224 User Manual

2-12

ni.com

Ground-Referenced Signal Connection

Figures 2-3, 2-5, 2-7, and 2-9 illustrate the ground-referenced signal 
connection. In this configuration, the voltage source being measured is 
referenced to its own ground reference that is connected through a 
conductive path to the instrument ground reference. For example, the path 
can be through a common earth ground or through the power line ground.

To connect a ground-reference signal source to the NI PXI-4224, the signal 
(

V

SIG

+) is connected to the NI PXI-4224 channel (AI

X

+). The signal 

reference (

V

SIG

–) is connected to the channel reference (AI

X

–).

Shielded Ground-Referenced Signal Connection 
(Recommended)

Figures 2-5 and 2-9 illustrate shielded ground-referenced signal 
connections. The connection to this signal source is identical to the 
ground-referenced signal connection with the addition of shielding 
around the field wiring. The shielding is grounded at the signal source 
ground (

V

SIG

Ground Reference). Connect the signal (

V

SIG

+) to the 

NI PXI-4224 channel (AI

X

+). Connect the signal reference (

V

SIG

–) to the 

channel reference (AI

X

–).

This shielding scheme is effective at reducing capacitive or electrically 
coupled noise. The same concerns regarding the difference in ground 
potentials, discussed in the 

Ground-Referenced Signal Connection

 section, 

also apply to this configuration.

For more information about the function of the NI PXI-4224 and other 
measurement considerations, refer to Chapter 4

Theory of Operation

.

Summary of Contents for Isolated Analog Input Device NI PXI-4224






















































































Reviews: