![background image](http://html.mh-extra.com/html/national-instruments/isolated-analog-input-device-ni-pxi-4224/isolated-analog-input-device-ni-pxi-4224_user-manual_709605012.webp)
Chapter 1
About the NI PXI-4224
1-4
ni.com
Installing the NI PXI-4224
Note
Refer to the
Read Me First: Radio-Frequency Interference
document before
removing equipment covers or connecting or disconnecting any signal wires.
Refer to the
DAQ Getting Started Guide
to unpack, install, and configure
the NI PXI-4224 in a PXI chassis, and then to the
SCXI Quick Start Guide
if you are using a PXI/SCXI combination chassis.
LED Pattern Descriptions
The following LEDs on the NI PXI-4224 front panel confirm the system is
functioning properly:
•
The
ACCESS
LED is normally green and blinks yellow for a minimum
of 100 ms during the NI PXI-4224 configuration.
•
The
ACTIVE
LED is normally green and blinks yellow for a minimum
of 100 ms during data acquisition.