National Instruments ISC-1772, User Manual

Page: 74 / 87

Appendix B Camera Attributes
© National Instruments Corporation B-5 NI 177x Smart Camera User Manual
ReverseY Boolean — — Flips the image vertically, along
the horizontal axis.
TestImageSelector Enum Off, Grey
Horizontal Ramp,
Grey Horizontal
Ramp Moving,
Frame Counter — Specifies the type of test image
that is generated by the camera.
TriggerActivation Enum Rising Edge,
Falling Edge — Specifies the activation mode of
the selected trigger.
TriggerDelay DBL 0 to 4294967280
μ
s Specifies the delay between
trigger reception and activation.
TriggerDelayEdgeCounts U32 0 to 268435455 Edge
Counts Specifies the delay between
trigger reception and activation.
TriggerDelaySource Enum Internal Clock,
Input 0 Edges,
Input 1 Edges,
Input 2 Edges,
Input 3Edges — Specifies the counter source for
the trigger delay.
TriggerDelayEdgeActivation Enum Rising Edge,
Falling Edge — Specifies the activation for the
trigger delay, when configured for
a delay.
TriggerMode Enum Off, On — Enables or disables the specified
trigger.
TriggerOverlap Enum Readout, Off — Specifies the type of overlap
permitted with the previous frame.
TriggerSelector Enum Frame Start — Specifies the trigger to modify.
TriggerSoftware Command — Sends a software trigger.
TriggerSource Enum External Trigger,
Fixed Rate,
Software — Specifies the source of the
selected trigger.
UserLEDState Enum Off, Green, Red,
Orange — Gets or sets the state of the user
LED.
UserOutputSelector Enum User Output 0,
User Output 1,
User Output 2,
User Output 3 — Specifies which bit in the User
Output register to set.
UserOutputValue Bool — — Gets or sets the status of the
selected user output.
Table B-1. Camera Attributes (Continued)
Attribute Name Data Type Range Unit Description