Index
©
National Instruments Corporation
I-3
software programming choices, 1-3 to 1-6
National Instruments
IMAQ Vision, 1-5
National Instruments
IMAQ Vision Builder, 1-5
NI-IMAQ driver software, 1-4
unpacking, 2-4
PCLK
genlock and synchronization
circuitry, 3-3
internal pixel clock specifications, A-2
PCLK, HSYNC, VSYNC mux, 3-3
PCLKIN± signal (table), 4-2
PCLKOUT± signal (table), 4-2
physical specifications, A-3
picture aspect ratio, 3-7
pin assignments
BNC connector (figure), 4-1
I/O connector (figure), 4-2
pixel clock.
See
PCLK.
power requirements, A-3
programmable gain and offset circuitry, 3-2
programming video parameters.
See
video
parameters, programming.
PXI-1409 device.
See also
PCI/PXI-1409
devices.
pins used (table), 1-2
using with CompactPCI, 1-2
R
referenced single-ended (RSE) input mode.
See
RSE (referenced single-ended) input
mode.
region of interest
control circuitry, 3-3
RSE (referenced single-ended) input mode
external CLK and synchronization input
mode, 2-6
VIDEO0 input, 2-6
RTSI bus, 3-4
S
scatter-gather DMA controllers, 3-3
signal connections, 4-1 to 4-4
BNC connector, 4-1
I/O connector, 4-1 to 4-4
pin assignments (figure), 4-2
signal descriptions (table), 4-2 to 4-3
software programming choices, 1-3 to 1-6
National Instruments IMAQ Vision, 1-5
National Instruments IMAQ Vision
Builder, 1-5
NI-IMAQ driver software, 1-4
specifications, A-1 to A-4
A/D conversion, A-2
environment, A-4
formats supported, A-1
internal pixel clock, A-2
PCI interface, A-2 to A-3
physical, A-3
power requirements, A-3
video input, A-1
standard acquisition mode, 3-4
SYNC mux, 3-3
synchronization circuitry, 3-3
system requirements, 2-1 to 2-2
T
technical support resources, C-1 to C-2
TRIG<3..0> signal (table), 4-3
V
vertical synchronization.
See
VSYNC.
video input specifications, A-1
video mux, 3-2
VHDCI connector.
See
I/O Connector.
VIDEO0 signal
avoiding 68-pin VHDCI connector with
BNC connection (note), 4-1
input mode, 2-6
