Index
I-2
ni.com
H
hardware overview, 3-1 to 3-5
10-bit ADC and LUT, 3-3
acquisition and region-of-interest
control, 3-3 to 3-4
acquisition modes, 3-4 to 3-5
block diagram, 3-2
CSYNC mux, 3-3
digital antichrominance filter, 3-3
functional overview, 3-1 to 3-4
genlock and synchronization
circuitry, 3-3
PCI interface, 3-3
PCLK, HSYNC, VSYNC mux, 3-3
programmable gain and offset, 3-2
RTSI bus, 3-4
scatter-gather DMA controllers, 3-3
video mux, 3-2
HSYNC
genlock and synchronization
circuitry, 3-3
PCLK, HSYNC, VSYNC mux, 3-3
HSYNCIN± signal (table), 4-3
I
IMAQ Vision software, 1-5
IMAQ Vision Builder software, 1-5
installation.
See also
configuration.
procedure for, 2-7 to 2-8
setting up IMAQ system, 2-2 to 2-3
unpacking the PCI/PXI-1409, 2-4
integration with DAQ and motion control, 1-6
internal pixel clock specifications, A-2
I/O connector, 4-1 to 4-4
avoiding VIDEO0 connection with BNC
connector, 4-1
custom cable specifications, B-1
pin assignments (figure), 4-2
signal descriptions (table), 4-3 to 4-4
VIDEO0 input, 2-6
J
jumpers
W1
input mode control for VIDEO0
input, 2-6 to 2-7
required for BNC input (note), 4-1
L
LabVIEW software, 1-3
lock mode, external, 3-4
lookup table, 10-bit ADC and LUT, 3-3
M
motion control, integrating with, 1-6
N
National Instruments application software,
1-3 to 1-6
National Instruments Web support, C-1 to C-2
NI-IMAQ driver software, 1-4
P
parts locator diagram, 2-5
PCI interface
specifications, A-3
PCI/PXI-1409 devices.
See also
hardware
overview.
features and overview, 1-1 to 1-2
optional equipment, 2-2
requirements for getting started, 2-1 to 2-2
setting up IMAQ system, 2-2 to 2-3
