National Instruments GPIB Series Getting Started Download Page 59

Page: 59 / 62

Index

GPIB-ENET/100 for Windows Me/98/95

I-2

ni.com

DNS

if not supported, 3-4
manually inserting hostname in DNS

table, 6-3

using with DHCP, 3-4, 6-2

DNS server, 3-5
Dynamic Host Configuration Protocol.

See

DHCP

EDVR error conditions, B-2
electrical characteristics, C-1
environmental characteristics, C-1
error checking, B-6
error code, A-1
Ethernet address, 2-3
Ethernet connection

location, 2-4

Ethernet Device Configuration utility

accessing during normal operation, 6-3
busy device, 3-2, B-6
example (figure), 3-2
GPIB-ENET, B-6
if GPIB-ENET/100 is not listed, B-6
locating and starting, 3-1, 6-5
Refresh option, 3-3, B-6
unconfigured device, 3-2
verifying hostname, 3-7
when to use, 2-6, 3-1

Ethernet Device Firmware Update utility

using, 6-5

failed device

reported by PWR/RDY LED, 2-6, A -1

firmware

updating, 6-5

firmware update utility

before using, 6-5
important warning, 6-5
running, 6-6
upgrade location, 6-5
when to use, 6-5

front panel (figure), 1-3

gateway IP, 3-5
getting started, 1-1
Getting Started Wizard

(figure), 5-2
testing installation, 5-1

glossary, G-1
GPIB cable

connecting, 2-5, 5-3

GPIB Configuration utility

running before using NI-488.2, 4-1

GPIB connection

location, 2-4

GPIB-ENET

configuring, 2-1
installing, 2-1
using with GPIB-ENET/100, B-5

GPIB-ENET/100

installing, 2-3
properties, 3-2

hardware overview, 1-2
hostname

accepting DNS hostname, 3-8
changing DNS entry, 3-9
default hostname, 2-3
editing, 3-8
fixing verification error, 3-8
using to identify device, 6-3

Summary of Contents for GPIB Series































































Search results

Summary of Contents for GPIB Series

Reviews:

Related manuals for GPIB Series

Brands by name

Popular brands

National Instruments GPIB Series, Getting Started

Search results

Summary of Contents for GPIB Series

Reviews:

Related manuals for GPIB Series

Brands by name

Popular brands