National Instruments GPIB Series Getting Started Download

Page: 52 / 62

National Instruments Corporation

C-1

Specifications

This appendix describes the characteristics of the GPIB-ENET/100 and the
transfer rates of the NI-488.2 software, along with the recommended
operating conditions.

Electrical Characteristics

Input power requirements ...................... 9–30 VDC

Current requirements

9–30 VDC ....................................... 425 mA maximum

@ 15 VDC ...................................... 250 mA typical

Environmental Characteristics

Operating temperature............................ 0 to 40 °C

Relative humidity, operating.................. 10 to 90% noncondensing

conditions

Storage temperature ............................... –20 to 70 °C

Relative humidity, storage ..................... 5 to 90% noncondensing

conditions

EMI ........................................................ FCC Class A Verified

Physical Characteristics

Overall case size (dimensions)............... 21.0 by 12.4 by 3.7 cm

(8.25 by 4.89 by 1.44 in.)

Case material.......................................... Hard plastic with metal baseplate

Weight .................................................... 0.41 kg (0.9 lb)

Summary of Contents for GPIB Series































































Search results

Summary of Contents for GPIB Series

Reviews:

Related manuals for GPIB Series

Brands by name

Popular brands

National Instruments GPIB Series, Getting Started

Search results

Summary of Contents for GPIB Series

Reviews:

Related manuals for GPIB Series

Brands by name

Popular brands