Index
©
National Instruments Corporation
Index-9
loc, 5-23 to 5-24
low-level bus management functions, 4-8
names and abbreviations, 4-6
onl, 5-25
parallel poll functions, 4-8
pct, 5-26
ppc, 5-27 to 5-28
ppu, 5-29 to 5-30
rd, 5-31 to 5-32
rpp, 5-33
rsc, 5-34 to 5-35
rsp, 5-36 to 5-37
rsv, 5-38
serial poll functions, 4-8
serial port functions, 4-9
sic, 5-39 to 5-40
spign, 5-41 to 5-42
sre, 5-43
stat, 5-44 to 5-48
examples, 5-47 to 5-48
GPIB error conditions returned
(table), 5-46
purpose and use, 5-44 to 5-47
serial port error conditions returned
(table), 5-46
status conditions returned
(table), 5-45
tmo, 5-49 to 5-50
trg, 5-51
wait, 5-52 to 5-54
examples, 5-54
purpose and use, 5-52 to 5-53
wait mask values (table), 5-53
wrt, 5-55 to 5-56
xon, 5-57 to 5-58
S mode programming, 4-1 to 4-11. See also
S mode functions.
choosing between S mode functions or
NI-488.2 software, 4-1
common questions, G-1 to G-2
conventions and considerations, 4-2
default settings and related functions
GPIB characteristics (table), 4-7
serial port characteristics (table), 4-6
error handling, 4-1
function arguments, 4-4 to 4-5
function names and abbreviations, 4-6
general programming steps, H-1
GPIB read and write termination methods
END message, 4-5 to 4-6
EOS character, 4-6
programming messages, 4-2 to 4-4
examples, 4-3
format, 4-2
processing of messages, 4-4
sample programs, H-1 to H-6
using HP 7475A plotter with
IBM PC, H-4 to H-6
using HP 7475A plotter with
terminal, H-1 to H-4
status information, 4-1
serial cable. See null-modem serial cable.
serial device
address for, 6-4
addressing GPIB-232/485CT-A and
serial device, 6-4
as listeners, 6-4 to 6-5
as talkers, 6-5 to 6-6
serial mode baud rate, switch settings for
S mode (table), 3-4
serial poll functions
list of S mode functions, 4-8
rsp function, 5-36 to 5-37
rsv function, 5-38
serial polling
programming GPIB-232/485CT-A, 6-7
response byte (table), 6-7 to 6-8
serial port functions
G mode
echo, 7-2 to 7-3
list of functions, 6-11
spign, 7-8
