manualshive.com logo in svg

National Instruments FD-11634, User Manual, Page: 4 / 55

Share
Download
National Instruments FD-11634 User Manual Download Page 4

Maintenance............................................................................................................................ 49
Where to Go from Here.......................................................................................................... 50

Example Programs.......................................................................................................... 50
Related Documentation...................................................................................................50
Training Courses............................................................................................................. 52
Technical Support on the Web........................................................................................ 52

FD-11634 Basic Information

Kit Contents

Items in your FieldDAQ kit:
•

FD-11634

•

FD-11634 Quick Start

•

FD-11634 Safety, Environmental, and Regulatory Information

•

1 M12 female cap for power IN connector (connected to device)

•

11 M12 male caps for power OUT, Ethernet, and input connectors (connected to device)

Pinouts

Refer to the following topics for the connector pinouts on your FieldDAQ device:
•

Signal input connector pinout: Refer to 

Signal Input Connectors

 on page 15.

•

Ethernet connector pinout: Refer to 

Ethernet Ports

 on page 28.

•

Power connector pinout: Refer to 

Power Connectors

 on page 12.

Driver Support

Earliest driver support version for your FieldDAQ device:

Table 1. FD-11634 Driver Support

Driver

Earliest Version Support

 

 

NI-DAQmx

18.6

Cables and Accessories

The following table lists some cables and accessories available for your FieldDAQ device. For
a complete list of FieldDAQ accessories and ordering information, refer to the pricing section
of the FD-11634 product page at 

ni.com

.

Table 2. FD-11634 Cables and Accessories

Cable/Accessory

Part Number

 

 

IP67 Power Supply

147464-01

PS-16 Power Supply

781094-01

FD-11634 User Guide

  | 

© National Instruments

  | 

3

Summary of Contents for FD-11634
























































Reviews:

No comments