manualshive.com logo in svg

National Instruments FD-11634, User Manual, Page: 38 / 55

Share
Download
National Instruments FD-11634 User Manual Download Page 38

4.

For CompactRIO and IC controllers, perform a custom installation of the NI-DAQmx
feature to the controller. In MAX, expand 

Remote Systems

»

your Real-Time Controller

,

and use the 

Add/Remove Software

 option. Select the custom installation option and the

NI-DAQmx feature, then follow the prompts to complete the installation.

5.

Make signal connections for your application.

6.

Align and connect one end of the Ethernet cable to Ethernet port 0 on the FieldDAQ
device, and the other end to a switch or network connection on the same subnet as your
Real-Time controller, or directly to an open network port on your Real-Time controller.
For more information about the recommended configurations for networking the
FieldDAQ device in a Real-Time system, refer to 

Topology Options

.

7.

Power the device by aligning and connecting the power IN port on FieldDAQ to an
external 9 V DC to 30 V DC power source with the 5-pin L-coded M12 power cable. For
information about wiring your external power source to the power connector, refer to 

Wiring External Power to the FieldDAQ Device

. The FieldDAQ device requires an

external power supply that meets the specifications listed in the 

FD-11634 Specifications

.

The Power LED turns on. Refer to 

Power LED

 for information about Power LED status.

8.

To add the FieldDAQ to the software configuration on the Real-Time target, open
NI MAX on the host computer. In the MAX configuration tree, expand 

Remote

Systems

»

your Real-Time Controller

»

Devices and Interfaces

»

Network Devices

.

9.

Click 

Add Network Device

, and then 

Find Network NI-DAQmx Devices

.

10. In the Find Network NI-DAQmx Devices dialog box that opens, do one of the following:

–

Check the box that corresponds to your device in the Hostname column.

–

If you know the device IP address, such as 192.168.0.2, enter it into the 

Add Device

Manually

 field of the Find Network NI-DAQmx Devices window, and click the 

+

button.

–

Enter the hostname of the device. The default hostname is FD11634-<

serial

number

>.

If your FieldDAQ device does not appear in Available Devices, click 

Refresh List

. If the

device still does not appear, contact your system administrator to confirm that the
network is working and that a firewall is not interfering with discovery. For additional
troubleshooting resources for the FieldDAQ device, refer to 

Troubleshooting Device

Connectivity

 in this guide and the 

Finding a Network DAQ Device in MAX

 topic in the

Measurement & Automation Explorer Help for NI-DAQmx

.

11. Click 

Add Selected Devices

. The FieldDAQ device is added under the Real-Time

controller in the MAX configuration tree.

FD-11634 User Guide

  | 

© National Instruments

  | 

37

Summary of Contents for FD-11634
























































Reviews:

No comments