©
National Instruments Corporation
I-1
Index
Numbers
+5 V signal (table), 3-3
82C55A Programmable Peripheral Interface
OKI 82C55A data sheet, B-1 to B-17
overview, 4-2
A
ACK* signal
description (table), 3-12
mode 1 output timing (figure), 3-14
mode 2 bidirectional timing (figure), 3-15
APA<7..0> signal (table), 3-3
APB<7..0> signal (table), 3-3
APC<7..0> signal (table), 3-3
B
battery pack, BP-1 (note), 2-2
BPA<7..0> signal (table), 3-3
BPB<7..0> signal (table), 3-3
BPC<7..0> signal (table), 3-3
bulletin board support, D-1
C
cable assembly connectors, 3-4 to 3-6
custom cabling, 1-6
overview, 3-4
pin assignments
pins 1 through 50 (figure), 3-5
pins 51 through 100 (figure), 3-6
common questions, C-1 to C-2
ComponentWorks software, 1-3
configuration. See also installation.
common questions, C-1 to C-2
Plug and Play capability, 2-4
connecting power to digital I/O lines, 3-8
connectors. See cable assembly connectors; I/O
connector pin descriptions.
CPA<7..0> signal (table), 3-3
CPB<7..0> signal (table), 3-3
CPC<7..0> signal (table), 3-3
custom cabling, 1-6
customer communication, xii, D-1 to D-2
D
DAQPad-6507/6508 devices
block diagram, 4-1
common questions, C-1 to C-2
custom cabling, 1-6
driving SSR-OAC-5 and SSR-OAC-5A
output modules (note), 1-2
interfacing with PCs, 1-1
NI-DAQ driver software version required
(note), 2-1
optional equipment, 1-5 to 1-6
overview, 1-1 to 1-2
requirements for getting started, 1-2
software programming choices, 1-2 to 1-5
National Instruments application
software, 1-3
NI-DAQ driver software, 1-4 to 1-5
theory of operation, 4-1 to 4-3
unpacking, 1-6
