Figure 9.
Installing the DIN Rail Clip on the cRIO-FRC II
2.
Insert one edge of the DIN rail into the deeper opening of the DIN rail clip.
Figure 10.
One Edge of the DIN Rail Inserted in a Clip
3
2
1
1. DIN Rail Clip
2. DIN Rail
3. DIN Rail Spring
3.
Press down firmly on the chassis to compress the spring until the clip locks in place on
the DIN rail.
Mounting the Chassis on a Desktop Using the NI 9901
Desktop Mounting Kit
You can use the NI 9901 desktop mounting kit to mount the chassis on a desktop. You must
install the adapter bracket using two M3 × 20 screws. The adapter bracket and the screws are
included in the kit. Refer to the NI 9901 documentation for information about mounting the
chassis on a desktop.
NI cRIO-FRC II User Manual and Specifications
|
© National Instruments
|
9
