press <Enter> on the desired configuration option and select a boot device from the
resulting menu. You can also disable certain boot devices by selecting
Disabled
.
•
When the DISABLE RT switch is not set, the only detectable boot options are LabVIEW
RT and LabVIEW RT Safe Mode.
Note
Only one device of a given type is shown in this list. If more than one
device of the same type exists, use the appropriate device BBS priorities
submenu to re-order the priority of devices of the same type.
The Boot Setup menu displays the following submenus when one or more bootable devices of
the corresponding type is present:
•
Hard Drive BBS Priorities Submenu—Use this setting to access the Hard Drive BBS
Priorities submenu to re-order or disable bootable hard drive devices.
•
CD/DVD ROM Drive BBS Priorities Submenu—Use this setting to access the CD/DVD
ROM Drive BBS Priorities submenu to re-order or disable bootable CD/DVD ROM drive
devices.
•
Floppy Drive BBS Priorities Submenu—Use this setting to access the Floppy Drive BBS
Priorities submenu to re-order or disable bootable floppy drive devices.
•
Network Device BBS Priorities Submenu—Use this setting to access the Network Device
BBS Priorities submenu to re-order or disable bootable network devices.
Boot Settings Configuration Submenu
The Boot Settings Configuration submenu applies alternate configurations to boot settings.
The factory default settings provide the most compatible and optimal configuration.
•
Setup Prompt Timeout—This setting specifies the number of seconds the system waits
for a BIOS Setup menu keypress (the <Delete> key). The default value is
2
seconds.
•
Bootup NumLock State—This setting specifies the power-on state of the keyboard
NumLock setting. The default value is
On
.
Hard Drive BBS Priorities Submenu
The Hard Drive BBS Priorities submenu specifies the boot priority of hard drive devices.
Boot Option #1, Boot Option #2, Boot Option #3—These settings specify that the main Boot
Option Priorities list displays the highest priority device. Optionally, each device can be
disabled if the device is not used as a boot device.
CD/DVD ROM Drive BBS Priorities Submenu
The CD/DVD ROM Drive BBS Priorities submenu specifies the boot priority of CD/DVD
ROM drive devices.
Boot Option #1, Boot Option #2, Boot Option #3—These settings specify that the main Boot
Option Priorities list displays the highest priority device. Optionally, each device can be
disabled if the device is not used as a boot device.
NI cRIO-9081 User Manual
|
© National Instruments
|
37
