1
2
3
1.
Prepare the surface for mounting the cRIO-9034 using the
2.
Align the cRIO-9034 on the surface.
3.
Fasten the cRIO-9034 to the surface using the M4 screws appropriate for the surface.
Screws must not exceed 8 mm of insertion into the cRIO-9034. Tighten the screws to a
maximum torque of 1.3 N · m (11.5 lb · in.).
Surface Mounting Dimensions
The following figure shows the surface mounting dimensions for the cRIO-9034.
Figure 14. cRIO-9034 Surface Mounting Dimensions
2×
23.7 mm (0.94 in.)
2×
20.3 mm (0.80 in.)
2×
20.3 mm (0.80 in.)
6× ISO M4 × 0.7 Thread
8 mm Maximum Insertion Depth
116.5 mm (4.59 in.)
29.0 mm (1.14 in.)
NI cRIO-9034 User Manual
|
© National Instruments
|
29
