National Instruments cRIO-9034, User Manual

Page: 13 / 42

Table 13. USB Host Port Pinout
Pinout Pin Signal Description
1 4 2 3
1 VCC Cable power (5 V)
2 D- USB data-
3 D+ USB data+
4 GND Ground
The following NI cable is available for the cRIO-9034.
Table 14. USB Host Port Cable
Cable Length Part Number
USB Extension with Retention, Type A Connectors 0.5 m 152166-0R5
2 m 152166-02
Related Information
File System on page 21
Installing a Ferrite on the USB Cables
You must install a ferrite around all USB cables connected to the USB host ports to ensure that
the cRIO-9034 meets all EMC standards applicable to your country.
What to Use
• Ferrite (711849-01), included with the cRIO-9034
• USB cables
What to Do
Install the ferrite on the USB cables, as shown in the following figure.
Figure 2. Installing a Ferrite on the USB Cables
2
1
NI cRIO-9034 User Manual | © National Instruments | 13