cRIO-FRC Operating Instructions and Specifications
8
ni.com
2.
Align the I/O module with an I/O module slot in the chassis as shown
in Figure 10. The module slots are labeled 1 to 8, left to right.
Figure 10.
Installing an I/O Module in the Chassis
3.
Squeeze the latches and insert the I/O module into the module slot.
4.
Press firmly on the connector side of the I/O module until the latches
lock the I/O module into place.
5.
Repeat these steps to install additional I/O modules.
1
Insertion Groove
2
Latch
NI cRIO-FRC
1
2
2
1
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com