©
National Instruments Corporation
3
cRIO-FRC Operating Instructions and Specifications
Note
You must remove all I/O modules from the chassis before mounting it. Your
application may require that one or more of the I/O modules be installed in specific slot
locations. Record the slot location of each module before removing the modules from the
chassis, and replace each module in the same slot after mounting.
Note
The cRIO-FRC is shipped with slot protectors that prevent debris and contaminants
from damaging the DB-15 I/O module connectors in unused slots. Do not remove slot
protectors from unused slots.
Figure 2.
cRIO-FRC, Bottom View with Dimensions
Figure 3.
cRIO-FRC, Front View with Dimensions
29 mm
(1.14 in.)
58.9 mm
(2.
3
2 in.)
3
.
3
mm
(0.1
3
in.)
286.4 mm
(11.28 in.)
C
a
bling Cle
a
r
a
nce
25.4 mm (1.00 in.)
87.
3
mm
(
3
.44 in.)
165.1 mm
(6.50 in.)
3
.1 mm
(0.12 in.)
51.1 mm
(2.04 in.)
3
6.4 mm
(1.4
3
in.)
19 mm
(0.75 in.)
NI cRIO-FRC
1
2
1
2
3
4
5
6
7
8
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com