National Instruments Corporation
1-1
BNC-2090 User Manual
Introduction
Chapter
1
This chapter describes the BNC-2090 accessory, lists what you need to
get started, and describes the optional equipment.
About the BNC-2090
The BNC-2090 accessory is a rack-mount analog breakout accessory
with signal-labeled BNC connectors, spring terminal blocks, and analog
signal conditioning areas. The BNC-2090 accessory simplifies the
connection of analog signals and digital signals to the DAQ board for
use in laboratory, test, and production environments. You can configure
the BNC-2090 to use eight differential or 16 single-ended analog input
channels available on the accessory. The BNC-2090 has silkscreened
component locations for resistors and capacitors for building single-
pole highpass and lowpass filters and voltage dividers.
You can use the BNC-2090 with a 50, 68, or 100-pin MIO DAQ board
or a 50-pin PC-LPM-16 DAQ board. Refer to Appendix B,
Using the
PC-LPM-16
, for information on using the PC-LPM-16 with the
BNC-2090.
What You Need to Get Started
To set up and use your BNC-2090 accessory, you will need the
following:
❑
BNC-2090 accessory
❑
BNC-2090 User Manual
❑
One of the following DAQ boards and the appropriate cable
50-pin MIO board (requires SH6850 or R6850 cable)
68-pin MIO board (requires SH6868 or R6868 cable)
100-pin MIO board (requires SH1006868 cable)
PC-LPM-16 DAQ board (requires SH6850 or R6850 cable)
