National Instruments 9501 C Series Getting Started Download Page 27 | Manualshive

Page: 27 / 27

National Instruments 9501 C Series Getting Started Download Page 27

© 2012 National Instruments. All rights reserved.

373871A-01

Dec12

LabVIEW, National Instruments, NI, ni.com, the National Instruments corporate logo, and the Eagle logo are trademarks of National Instruments
Corporation. Refer to the

Trademark Information

at

ni.com/trademarks

for other National Instruments trademarks. Other product and

company names mentioned herein are trademarks or trade names of their respective companies. For patents covering National Instruments
products/technology, refer to the appropriate location:

Help»Patents

in your software, the

patents.txt

file on your media, or the

National

Instruments Patents Notice

at

ni.com/patents

. You can find information about end-user license agreements (EULAs) and third-party legal

notices in the LabVIEW NI SoftMotion Module Readme. Refer to the

Export Compliance Information

at

ni.com/legal/

export-compliance

for the National Instruments global trade compliance policy and how to obtain relevant HTS codes, ECCNs, and other

import/export data.

Worldwide Support and Services

The National Instruments Web site is your complete resource for technical support. At

you have access to everything from troubleshooting and application

development self-help resources to email and phone assistance from NI Application Engineers.

Visit

ni.com/services

for NI Factory Installation Services, repairs, extended warranty,

calibration, and other services.

Visit

ni.com/register

to register your National Instruments product. Product registration

facilitates technical support and ensures that you receive important information updates from NI.

A Declaration of Conformity (DoC) is our claim of compliance with the Council of the European
Communities using the manufacturer’s declaration of conformity. This system affords the user
protection for electromagnetic compatibility (EMC) and product safety. You can obtain the DoC
for your product by visiting

ni.com/certification

If your product supports calibration,

you can obtain the calibration certificate for your product at

ni.com/calibration

National Instruments corporate headquarters is located at 11500 North Mopac Expressway,
Austin, Texas, 78759-3504. National Instruments also has offices located around the world to
help address your support needs. For telephone support in the United States, create your service
request at

and follow the calling instructions or dial 512 795 8248. For

telephone support outside the United States, visit the Worldwide Offices section of

to access the branch office Web sites, which provide up-to-date contact information,

support phone numbers, email addresses, and current events.

«
...
25
26
27

Summary of Contents for 9501 C Series




























Reviews:

No comments