©
National Instruments Corporation
5
Where to Start with the NI 435X
♦
NI PCMCIA-4350
Figure 1.
NI PCMCIA-4350 System
You can install the NI PCMCIA-4350 in any available Type II PCMCIA
slot in the computer.
Windows 98 or later includes the Plug and Play services that the operating
system uses. Windows NT 4.0 or higher includes the drivers needed to use
PCMCIA cards. The operating system configures the NI PCMCIA-4350
and automatically assigns the base address and the interrupt level. The
following are general installation instructions, but consult the PC user
manual or technical reference manual for specific instructions and
warnings:
1.
Write down the NI PCMCIA-4350 serial number for future reference.
2.
Power off the computer.
Note
If the computer and operating system support hot insertion, you can insert or remove
the NI PCMCIA-4350 at any time, even if the computer is powered on.
3.
Remove the PCMCIA slot cover on the computer.
1
Portable Computer
2
PCMCIA Socket
3
NI PCMCIA-4350
1
2
3
