©
National Instruments Corporation
3
Where to Start with the NI 435X
ESD precautions are necessary. However, for your own safety and to
protect the NI USB-4350,
never
touch the connector pins.
What You Need to Get Started
To set up and use the NI 435
X
device, you need the following items:
❑
A computer
❑
One of the following NI 435
X
high-precision DAQ devices:
–
NI PCMCIA-4350
–
NI USB-4350
–
NI PXI-4351
–
NI PCI-4351
❑
NI-DAQ 6.9.3 or higher for PC compatibles
❑
Logger Soft Front Panel 1.0.1 or higher
❑
If you want to program with the device, use one of the following
software packages and documentation:
–
LabVIEW 6.1 or later
–
Measurement Studio LabWindows
™
/CVI
™
4.0 or later
–
Measurement Studio for Visual Basic
–
Third-party compiler
❑
Optional cables and accessories
❑
Read Me First: Safety and Radio-Frequency Interference
❑
VI Logger Soft Front Panel Note to Users
❑
Getting Started with VI Logger
Installing the Software
Install NI-DAQ and the application software before you install the
NI 435
X
device. If you are using LabVIEW, Measurement Studio
LabWindows/CVI, or Measurement Studio for Visual Basic, refer to their
software release notes for installation instructions. If you are using
programming languages such as Visual Basic, C, or C++ with NI-DAQ,
follow the NI-DAQ release note instructions for installing third-party
compilers.
