6
cFP-20xx Quick Start Guide
ni.com
IIn
nsstta
allll tth
he
e c
cFFP
P--2200
xxxx C
Co
on
nttrro
olllle
err o
on
n tth
he
e B
Ba
ac
ckkp
plla
an
ne
e
A. Make sure that no power is connected to the controller or the backplane.
B. Make sure that the cFP-20
xx controller is right side up with the NI logo at the top, and
align the captive screws on the controller with the holes on the backplane.
C. Seat the card edge at the back of the controller in the card-edge connector on the
backplane.
D. Press the controller firmly to seat it on the backplane.
E. Using a number 2 Phillips screwdriver with a shank of at least 64 mm (2.5 in.) length,
tighten the captive screws to 1.1 N
⋅⋅
m (10 lb
⋅⋅
in.) of torque.
2
NAT
ION
AL
INST
RUM
ENT
S