National Instruments Corporation FieldPoint cFP-20 Series, Quick Start Manual

Page: 22 / 23

22
cFP-20xx Quick Start Guide
ni.com
Electromagnetic Compatibility
CE, C-Tick, and FCC Part 15 (Class A) Compliant
Emissions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EN 55011 Class A at 10 m FCC Part 15A above 1 GHz
Immunity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EN 61326-1:1997 + A1:1998, Table 1
For EMC compliance, operate this device with shielded cabling and with all cover and filler panels installed.
CE Compliance
This product meets the essential requirements of applicable European Directives, as amended for CE Marking,
as follows:
Low-Voltage Directive (safety) . . . . . . . . . . . . . . . . . . . . 73/23/EEC
Electromagnetic Compatibility Directive (EMC) . . . . . . . 89/336/EEC
Cabling
The table below shows the standard Ethernet cable wiring connections for both normal and crossover cables.
Connector 1 Connector 2
pin 1 pin 1 pin 8 pin 8
Ethernet Cable
Connector Pinouts
1 white/orange white/orange white/green
2 orange orange green
3 white/green white/green white/orange
4 blue blue blue
5 white/blue white/blue white/blue
6 green green orange
7 white/brown white/brown white/brown
8 brown brown brown
Connector 2 Connector 2
Pin Connector 1
(Normal) (Crossover)
N NO OT TE E Refer to the Declaration of Conformity (DoC) for this product for additional regulatory compliance
information. To obtain the DoC for this product, click Declarations of Conformity Information at
ni.com/hardref.nsf/
.