407170_ROGUE_RevA
To avoid personal injury:
●
Instructions for safe hoisting are described be-
low. Read these instructions carefully before
hoisting. Personnel in proximity of the machine
must wear adequate safety equipment.
WARNING
TRANSPORTING THE MACHINE
35
35
1.
Shut off machine and unplug from power source.
2. Bundle the cord and tuck in front of the handle to prevent
cord from dragging on the floor.
3. Attach lifting hardware to the proper lifting points.
4. Using hoist, lift the machine slowly.
IMPORTANT:
●
Choose lifting hardware appropriate for the weight and
configuration of the machine.
●
Machine weight is shown in “MACHINE SPECIFICA-
TIONS” section and on serial number label.
●
Do not lift loads that exceed the maximum rated capacity
of the hoist and the lifting hardware.
●
Be sure the hooks have a safety latch.
●
Always inspect the lifting hardware before each use. Do
not use if worn or damaged.
●
Be sure the weights and blade holder are properly se-
cured to the machine before hoisting.
●
Use only proper lifting points. Do not attach lifting hard-
ware to handle, weights, blade holder or tooling holder.
Weights and handle could detach causing injury. The
machine could be damaged.
●
Do not enter and do not allow others to enter the working
area under the suspended load. Do not move the load
over people.
●
Load disengagement can cause severe injury. Always
make sure lifting hardware is properly connected.
●
Follow your company’s safety guidelines to avoid injury.
Lifting points
HOISTING
