Operation
- 12 -
4.2
Removal and placing of the waste bag
Stop the dust collector motors by pressing the relevant STOP buttons.
Warning!
Disconnect the plug from the power socket.
Use two ties to fasten the collection bag at two points (about 1.2-2” or 3-5 cm from each other), just
below the filter chamber.
Cut off the bag in the position between the two ties.
Remove the lower part of the bag.
Pull down a length of new bag from the chamber, until it reaches the bottom support plate
Attention!
Used bags should be disposed of into a special waste disposal container, in accordance with laws
applicable in the location where the dust collector is used.
