Installation
- 9 -
3.2
Installation
Warning!
Before installing the pre-separator, carefully make a sight check to pinpoint any damage suffered during
transport.
In the event of any component parts being damaged, do not proceed with installation. Notify the
manufacturer and reach an agreement on how to proceed.
Fit the equipment or accessory required for the type of collecting operation on the opposite end of the
hose.
Contact your dealer for information relating to the different types of optional accessories available for this
specific dust collector model.
1.
Connect the dust collector inlet to the separator outlet (1).
2.
Connect the accessory to the separator inlet (2).
3.
Fit the supplied pipe on the connector.
4.
Fit the supplied connector on the pipe union.
1
2