20
Operation
USING THE FILTER SHAKER SYSTEM
THIS OPERATION MUST ONLY BE PERFORMED WITH THE MACHINE SWITCHED OFF ONCE THE MOTOR(S) HAS COME TO A COM
-
PLETE HALT.
The filter shaking system is best operated every time before use and after prolonged operation.
On the front of the dust collector, a filter pressure drop gauge indicates the degree of vacuum inside.
If the gauge indicates a high drop in pressure (while the dust collector is working and the collecting inlet is disconnected from any equipment or
accessories), the filter will have to be shaken by means of the special lever. If the pressure gauge remains high, clean or replace the filter.
403079_RevB
CAUTION:
NEVER USE THE MACHINE WITH THE FILTER BLOCKED.
CAUTION:
DURING COLLECTING, AVOID ROLLING UP OR TWISTING THE FLEXIBLE HOSE
CAUTION:
IF THE ARROW OF THE FILTER PRESSURE DROP GAUGE STAYS IN THE RED AREA EVEN AFTER CLEANING THE FILTER,
THE HOSE OR SUCTION ACCESSORY COULD BE BLOCKED. IN THIS CASE, CLEAN AND REMOVE THE BLOCKAGE
