25
Maintenance
CLEANING THE FILTERS
•
Remove filter from machine by following the steps in “Replacing the Filters”.
NOTE:
HEPA filters are NOT washable.
•
Gently tap filter to dislodge loose contaminants. Use a garbage bag or other suitable container to catch the material, keeping in mind the
type of material that was picked up during operation.
•
Rinse filter with warm, running water from the inside out.
•
Let filter soak for 10-20 minutes in warm water with a mild dishwashing soap.
•
Gently wash filter by rolling it through the water. A soft brush can also be used to clean the pleats, but be careful to not tear the filter.
•
Rinse filter with clean, running, warm water and let air dry.
NOTE:
The filter must be completely dry before using again. Do NOT use compressed air to dry the filter.
•
When filter is completely dry, re-install it on the machine.
Keep in mind that filters do have a life span and washing won’t get them back to like-new performance; however, it will be better than using dirty
filters. Inspect filters regularly for any damage to the filter media. If the media is damaged, replace the filter.
