National Flooring Equipment DL2000, Operating Manual

Page: 10 / 28

Safety
- 8 -
2.2 Safety warnings
Attention!
The following indications are, by themselves, not enough to fully protect against all the hazards that
could arise during dust collector operation. These will have to be integrated with common sense and the
experience of the operator, both of which are crucial factors for preventing accidents. Each section of this
manual lists further specific safety warnings for the various operations.
Maintenance jobs must always be performed with the power plug detached from the power source.
The employer must inform and train the user according to the provisions of applicable laws.
Before using the machine, prepare and train yourself by reading this manual carefully. Use of the machine
by untrained and unauthorised persons is forbidden.
Using the machine to collect toxic substances is forbidden unless this has been equipped with special filters
required for the specific type of dusts. Such filters must be explicitly requested by you.
If the machine is used to collect toxic-harmful substances, the Longopac® container must be emptied and
the filters cleaned using adequate individual protection devices, selected according to the type of
substances to be collected.
Do not collect flammable materials or substances which could cause explosions (fuels, solvents, etc.). To
collect such materials, the machine must be built with Anti-explosion Motor and Electric System and this
must be requested by you explicitly.
Do not collect corrosive substances unless the machine is equipped with containers suitable for this
purpose.
Use of the machine without the supplied filters is not recommended.
If the filters are correctly fitted, the machine will not eject any objects.
Never rest miscellaneous materials on the horizontal protection guard.
The machine casing containing moving parts must not be removed by the user.
When using the machine, mind other people, especially children.
Use the machine cautiously on slopes and ramps.
Do not change direction on gradients.
Make sure the parked machine remains stable by operating the braked wheel.