manualshive.com logo in svg

National Flooring Equipment 8000, Manual, Page: 23 / 68

Share
Download
National Flooring Equipment 8000 Manual Download Page 23

Blades

23

FIG. RR

FIG. QQ

FIG. PP

Fax: 763-535-8255

[email protected]

7079-2 

2” X 6” ULTRA HD CERAMIC EPOXY BLADE    

.500

7079-4 

4” X 6” ULTRA HD CERAMIC EPOXY BLADE    

.500

7079-6 

6” X 6” ULTRA HD CERAMIC EPOXY BLADE    

.500

PART# DESCRIPTION 

 

THICKNESS (IN.)

Designed for ceramic removal and thin-set rescraping. 1/2” of carbide. The extra carbide 
allows for maximum resharpening. Strong enough to work on machines up to 3500 lb.

ULTRA HEAVY DUTY CERAMIC EPOXY ANGLE 
SHANKS W/ CARBIDE TIPS (FIGURE QQ)

7081 

3” X 10” INCREASED ANGLE BLADE 

  

.062

7083 

3” X 8” INCREASED ANGLE BLADE 

  

.062

PART# DESCRIPTION 

 

THICKNESS (IN.)

INCREASED ANGLE BLADES (FIGURE RR)

These blades are mainly used for VCT, but can be used on most other applications. They 
supply a greater angle when needed.  Prevents machine from jumping off material. They 
contribute to keeping the machine steady and reduce jumping.

7076-8 

2” X 8” TAPERED W/ CARBIDE TIP 

  

.300

7076-11 

2” X 11” TAPERED W/ CARBIDE TIP 

  

.300

7078-8 

3.5” X 8” TAPERED W/ CARBIDE TIP 

  

.300 

7078-11 

3.5” X 11” TAPERED W/ CARBIDE TIP 

  

.300

PART# DESCRIPTION 

 

THICKNESS (IN.)

TAPERED CUTTING HEAD SHANKS (FIGURE PP)

The longer taper works great on tough wood 

fl

 oors (glued & nailed). The long length allows 

the blade to easily slide under tough materials.  They work through most ceramics and 
VCT.

Summary of Contents for 8000





































































Reviews:

No comments