National Flooring Equipment 8000, Manual, Page: 22 / 68

Blades
22
FIG. KK
FIG. LL
FIG. MM
FIG. NN
FIG. OO
www.nationalequipment.com Phone: 763-315-5300
PREMIUM HIGH TEMPERED BLADES (FIGURE KK)
These ultra-high quality spring steel blades are extra hard; ensuring long blade life between
sharpenings. They work on all glued down carpets, VCT, VAT, rubber tile, cork, re-scraping
adhesive and elastomeric coatings. Great for
fl oor accumulations!
7050-200 3” X 6” PREMIUM HIGH TEMPERED BLADE .062
7050-201 3” X 8” PREMIUM HIGH TEMPERED BLADE .062
7050-202 3” X 10” PREMIUM HIGH TEMPERED BLADE .062
7050-203 3” X 12” PREMIUM HIGH TEMPERED BLADE .062
7050-204 3” X 14” PREMIUM HIGH TEMPERED BLADE .062
7050-205 3” X 27” PREMIUM HIGH TEMPERED BLADE .062
PART# DESCRIPTION THICKNESS (IN.)
7070-2 4” X 2” STRAIGHT SHANK BLADE .500
7070-3 4” X 3” STRAIGHT SHANK BLADE .500
7070-4 4” X 4” STRAIGHT SHANK BLADE .500
7070-6 4” X 6” STRAIGHT SHANK BLADE .500
PART# DESCRIPTION THICKNESS (IN.)
STRAIGHT SHANK BLADES (FIGURE LL)
Works well for ceramic, wood and thick epoxy. The ultimate for the toughest removals.
Made from an ultra tough alloy, which is put through special processing to give these
blades unbelievable edge holding ability for ceramic epoxy, thin-set, mud set, decorative
concrete toppings and much more.
7071-2 4” X 2” ANGLE SHANK BLADE .500
7071-3 4” X 3” ANGLE SHANK BLADE .500
7071-4 4” X 4” ANGLE SHANK BLADE .500
7071-6 4” X 6” ANGLE SHANK BLADE .500
PART# DESCRIPTION THICKNESS (IN.)
ANGLE SHANK BLADES (FIGURE MM)
Works well for ceramic and thick epoxy. The same applicationas the #7070 blades, but is
mounted at an angle to achieve the optimum shear point for optimum performance.
7072-2 4” X 2” STRAIGHT SHANK W/ CARBIDE TIP .500
7072-3 4” X 3” STRAIGHT SHANK W/ CARBIDE TIP .500
7072-4 4” X 4” STRAIGHT SHANK W/ CARBIDE TIP .500
7072-6 4” X 6” STRAIGHT SHANK W/ CARBIDE TIP .500
PART# DESCRIPTION THICKNESS (IN.)
STRAIGHT SHANK W/ CARBIDE TIP (FIGURE NN)
Works well for ceramic and thick epoxy. The same application as the #7070 blades, but are
carbide tipped for holding a sharp edge for long periods. Nothing else performs like carbide
when no other blade will work. Works well on elastomeric coatings.
7075-8 2’’ X 8’’ TAPERED CUTTING HEAD SHANK .300
7075-11 2’’ X 11’’ TAPERED CUTTING HEAD SHANK .300
7077-8 3.5” X 8’’ TAPERED CUTTING HEAD SHANK .300
7077-11 3.5” X 11’’ TAPERED CUTTING HEAD SHANK .300
PART# DESCRIPTION THICKNESS (IN.)
TAPERED CUTTING HEAD SHANKS (FIGURE OO)
The longer taper works great on tough wood fl oors (glued & nailed). The long length allows
the blade to easily slide under tough materials. They work through most ceramics and
VCT.