EN
2.
1.
3.
4.
6.
5.
–
Play / Pause
1
–
Assistant [hold 2 sec.]
–
On / Off [hold 4 sec.]
–
Volume [+]
–
Skip track [hold 2 sec.]
–
Volume [-]
–
Previous track [hold 2 sec.]
4 – LED
5 – Micro USB charging port
6 – Microphone [at back]
2
3
REMOTE
PACKAGE CONTENT
Wireless earphones NSL-1337
MicroUSB cable
Manual
PAIRING NEW DEVICE WITH THE EARPHONE
Warning! If device, that was previously paired with earphones is in range of
the earphones, then its Bluetooth should be turned off or the pair should be
unpaired.
1. Enable pairing mode in the device you want to pair earphones with.
2. Hold On [1] button for 4 seconds, LED [4] will start blinking in blue-red
colors.
3. Select NSL-1337 from the list of available devices on your device.
4. Earphones will confirm connection with short voice prompt and the LED
[4] will turn red.
CONNECTING PREVIOUSLY PAIRED DEVICE
WITH THE EARPHONES
1. Turn on Bluetooth in the device, that was previously paired with
earphones.
2. Hold On [1] button for 4 seconds.
3. Devices will pair automatically, and LED [4] will start blinking in blue.
SAFETY INFORMATION
GENERAL
CHARGING THE EARPHONES
When the battery is low, earphones will play a short prompt to signal
they should be charged.
To charge the battery:
1. Connect the microUSB cable (provided) to earphones.
2. Connect the cable to an appropriate power source.
3. If cable was connected properly, then LED [4] will turn red.
4. Earphones are fully charged, when LED [4] turns blue.
VOICE ASSISTANT
If source device supports voice assistant functionality (Siri™, Google Now™)
and it is properly configured, it can be used by holding On [1] button for 2
seconds. Assistant will be heard in earphones and you will be able to give it
commands.
