E8 Swing Automatic Gate. Revision 1.1.8 –1112
6 of 19
The arms should be approximately 10-15mm from full extension when the gate
completely closes against the floor rubber stopper.
o
This is to ensure that when in operation, the arms will give a solid push to
the gate onto the floor stopper.
If the gate does not fully close, even when the arms have fully extended, re-adjust
the gate post brackets position.
o
A smaller [K] is necessary if gate does not fully close
o
A bigger [J] will allow for a more positive push of the gate towards the floor
stopper.
Once the final position of the gate post has been determined, secure the gate post
brackets onto the pillar(s).
Repeat the same procedure for the second gate leaf (Double).