Yrittäjäntie 14, FI-27230 Lapland • phone +358 0207 416 740 • fax +358 0207 416 743 • www.narvi.fi
2
GB
FIGuRe 1
FIGuRe 2
SOFTY SAUNA BASE RING INSTALLATION HEIGHT FROM
FLOOR.
Narvi Softy sauna
base ring
This sauna platform skirting user manual is applicable to
the Narvi Softy 907116 (6.8 kW), 907117 (9 kW) and 907118
(10.5 kW) sauna heaters.
If you are using the Narvi Softy
907113 (6 kW) or 907115 (9 kW) sauna heater, when in-
stalling the sauna platform skirting you must take into
account the safety intervals applicable to surfaces of
flammable materials indicated in the sauna heater user
manual and the information plaque!
The sauna heater
model is indicated in the information plaque attached to
the heater.
The edge of the sauna bench can be used with boards with
a maximum thickness of 30 mm. When installing the frame
of the bench (girders, feet, supports) safety distances stip-
ulated for the heater shall be observed.
Supplied:
»
ring
»
packaging / template
»
attachment parts, 4 pcs
»
screws 4.2 x 25, 4 pcs
Installation
»
Remove the template from the packaging cover.
»
Use the template to draw the outline of the hole to be
made in the sauna base
(Figure 1)
. When installing the
ring, ensure that it is centred on the hole edges.
»
Make the hole along the drawn outline.
»
Fixate the attachments parts (4 pcs) using the screws
from below to the sauna base
(Figure 2)
.
max 750
DIMENSIONS OF THE ApERTURE OF THE SOFTY SAUNA
pLATFORM SkIRTING FOR THE SOFTY 907116 (6.8 kW)
AND 907117 (9 kW) SAUNA HEATERS.
DIMENSIONS OF THE ApERTURE OF THE SOFTY SAUNA
pLATFORM SkIRTING FOR THE SOFTY 907118 (10.5 kW)
SAUNA HEATER.
min 60
min 465
min 90
min 465