NARGESA MX700, Instruction Book, Page: 9 / 41

INSTRUCTION BOOK HYDRAULIC PUNCHING MACHINE MX700 8
4. INSTALLMENT AND STARTING UP
4.1. Location of the machine
Efforts will be made to locate the machine properly to avoid having to move, otherwise the user must follow
the guidelines described in section transport (nº2). It should be placed on a flat, level surface to prevent
vibration and movement of the joint while performing. It is possible to fix the machine by bolts as is
provided with a lower base or foot with four holes as shown in Picture 7.
Picture 7
4.2. Dimensions and working site
When the machine is placed on site its dimensions, the workspace of the operator and the possible lengths
of the workpiece are to be taken into account.
The machine must be used by a single operator, which is to be placed frontally to the machine, never in a
lateral area because he has to control the whole machine and also main protections are designed to use
the front of it.
Picture 8
4.3. Admissible outer conditions
- Temperature 5ºC and +40ºC without exceeding an average temperature of +35ºC during 24h
- Humidity between 30% and 90% with no water condensation.